TM 9-2350-261-34
91. Install ground lead (1) on coolant pump ter-
minal (2). Secure with nut (3).
92. Install circuit 402B lead (4) on coolant
pump terminal (5). Secure with nut (6).
93. Install circuit 402B (4) on terminal 4 (7) on
terminal strip (8) with screw (9).
94. Remove four screws (10), washers (11), and
plate (12) from driver’s compartment
bulkhead. Discard plate.
95. Thread terminal ground lead (13) and cool-
ant heater connector (14) through driver’s
compartment bulkhead opening.
96. Connect coolant heater connector (14) of wir-
ing harness (15) to coolant heater recepta-
cle (16).
97.
98.
99.
100.
101.
Connect control box connector (17) of wiring
harness (15) to control box receptacle (18).
Connect main wiring harness 402A lead
(19) to coolant heater wiring harness
lead (20).
Install wiring harness (15) on front main
wiring harness (21). Secure with eight
straps (22).
Install wiring harness plate (23) on driver’s
compartment bulkhead. Secure with four
screws (10) and washers (11).
Install wiring harness (15) and terminal
ground lead (13) on mounting bracket (24).
Secure with two screws (25), nuts (26),
clamps (27), and lockwashers (28).
14-44
