TM 9-2350-261-34
102.
103.
104.
105.
106.
107.
Remove two screws (1) and control panel
(2) from control box case (3).
Remove and discard two screws, nuts, and
washers supplied with control box case (3).
Install control box case (3) on hull bracket
(4). Secure with two new screws (5).
Install control panel (2) in control box case
(3). Secure with two screws (1).
Connect circuit 402A lead (6) to control
lead (7).
Lower power plant grill assembly
(see your 20).
box
108.
109.
110.
111.
112.
Remove four screws (8), washers (9), and
plate (10) from grill. Discard plate.
Install upper tube (11) on exhaust pipe
(12). Secure with clamp (13). Do not
tighten.
Position upper tube (11) and gasket (14) on
grill.
Secure with four screws (8) and
washers (9).
Tighten clamp (13).
GO TO NEXT PAGE
14-45