REPLACE FUEL CONTROL VALVE

FOLLOW-THROUGH STEPS - TM-9-2350-261-34_409

TM-9-2350-261-34 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
385

TM 9-2350-261-34 REPLACE FUEL CONTROL VALVE DESCRIPTION This task covers: Remove (page 14-48). Fuel Flow Test (page 14-49). Leak Test (page 14-49). Install (page 14-50). INITIAL SETUP Tools: Personnel Required: Automotive Fuel and Electrical System Repair Fuel and Elec Sys Rep 63G10 Tool Kit (Item 7, App B) Calibrated cubic centimeter container References: Overflow receptacle See your -20 Watch 24 V Power Supply (Assembled Batteries) Equipment Conditions: Materials/Parts: Engine coolant heater removed from carrier (see your -20) Insulating varnish (Item 36, App C) REMOVE 1. Remove nut (1) from union (2) beneath fuel control valve (3). 2. Remove two screws (4) and fuel control valve (3) from bracket (5) and fuel tube (6). 3. 4. Remove four screws (7) and guard (8) from coolant heater (9). Disconnect two fuel control valve leads (10 and 11) from overheat thermostat (12). 5. Disconnect fuel control valve lead (13) from terminal strip (14). 14-48

Privacy Statement
Press Release
Contact