TM 9-2350-261-34
112.
113.
Place fuel hose (1) next to personnel heater
fuel hose (2).
Install fuel hose (1) on personnel heater
fuel hose (2). Secure with 10 straps (3).
117.
118.
119.
120.
121.
122.
123.
124.
Remove four screws (13), washers (14),
and plate (15) from driver’s compartment
bulkhead. Discard plate.
Thread terminal ground lead (16), coolant
heater connector (17), and wiring harness
(18) through new wiring harness plate (19)
and driver’s compartment bulkhead
opening.
Install wiring harness plate (19) on driver’s
compartment bulkhead. Secure with four
screws (13) and washers (14).
Connect coolant heater connector (17) of
wiring harness (18) to coolant heater recep-
tacle (20).
Install wiring harness (18) and terminal
ground lead (16) on mounting bracket (21).
Secure with two screws (22), nuts (23),
clamps (24), and lockwashers (25).
Connect control box connector (26) of wiring
harness (18) to control box receptacle (27).
Connect main wiring harness circuit 400C
lead (28) to coolant heater wiring harness
lead (29).
Install wiring harness (18) on front main
wiring harness (30). Secure with eight
14-29
114. Install ground lead (4) on coolant pump
terminal (5). Secure with nut (6).
115. Install circuit 402B lead (7) on coolant
pump terminal (8). Secure with nut (9).
116. Secure circuit 402B lead (7) to terminal 4
(10) on terminal strip (11) with
screw (12).
GO TO NEXT PAGE
straps (31).
