TM 9-2350-261-34
125. Install blowtorch (1) on two brackets (2).
131.
Secure with strap (3).
126.
127.
128.
129.
130.
Remove two screws (4) and control panel
(5) from control box case (6).
Remove and discard two screws, nuts, and
washers supplied with control box case (6).
Install control box case (6) on hull bracket
(7). Secure with two screws (8).
Install control panel (5) in control box case
(6). Secure with two screws (4).
Connect circuit 400C lead (9) to control box
lead (10).
14-30
132.
133.
134.
135.
136.
Lower power plant grill assembly
(see your –20).
Remove four screws (11), washers (12),
and plate (13) from grill. Discard plate.
Install upper tube (14) on exhaust pipe
(15). Secure with clamp (16). Do not
tighten.
Position upper tube (14) and gasket (17)
on grill.
Secure with four screws (11) and
washers (12).
Tighten clamp (16).
