TM 9-2350-261-34
FOLLOW-THROUGH
1.
2.
3.
4.
5.
6.
7.
Install personnel heater
Lower power plant grill
STEPS
see your –20).
8.
see your –20).
9.
Fill carrier cooling system (see your –20).
Fill coolant heater cooling system
10.
(see your –20).
Connect battery ground lead (see your -20).
11.
Bleed coolant heater fuel line (see your -20).
12.
Start coolant heater (see your -10). Check for
leaks and that heater operates properly. Turn 13.
heater off.
14.
Install rear and right front floor plates
(see your –20).
Install driver’s power plant access panel
(see your –20).
Install power plant rear access panel
(see your -20).
Close power plant front access door and
raise trim vane (see your –10).
Raise and lock ramp (see your -10).
Stop engine (see your -10).
Install generator set (see your -10).
14-32
END OF TASK
