TM 9-2350-261-34
137.
138.
139.
Install wiring harness (1) on mounting
140.
bracket (2) left side. Secure with screw (3)
and clamp (4).
Install wiring harness (1) on two weldnuts
(5). Secure with two clamps (6) and
141.
screws (7).
Remove three screws (8) that secure fuel
142.
control cable (9) and three clamps (10) to
three weldnuts (11).
Install wiring harness (1) and fuel control
cable (9) to three weldnuts (11). Secure
with three screws (8), clamps (10), and
clamps (12).
Replace standard generator belts with kit
belts (see your -20).
Replace standard fan drive belts with kit
belts (see your -20).
143. Open coolant heater fuel valve (13).
GO TO NEXT PAGE
14-31
