TM 9-2350-261-34
W A R N I N G
D ry
cleaning
solvent
P - D - 6 8 0 i s
toxic
and
flammable. Always use in
an open area with good air
flow, away from sparks,
h e a t . o r f l a m e s . W e a r
goggles and gloves. Do not breathe
vapors. Avoid contact with skin, eyes, and
clothes. If you get dizzy while using
solvent, breathe fresh air and get medical
help. If solvent gets on hands, wash them.
If solvent gets in eyes, flush eyes with
fresh water
a n d g e t m e d i c a l h e lp
immediately.
Keep fire extinguisher
nearby.
104.
105.
Clean external pipe threads of elbow (1)
with dry cleaning solvent.
Apply a thin, even coat of primer and then
sealing compound (Item 70) to cleaned ex-
ternal pipe threads of elbow (1). Do not
apply primer or sealing compound beyond
small end of threads.
106.
107.
108.
109.
110.
111.
Install elbow (1) in transverse beam (2).
Secure with nut (3).
Install fuel hose (4) in control valve elbow
(5) and adapter body (6). Secure with two
sleeves (7) and nuts (8).
Install fuel hose (4) on weldnut (9). Secure
with screw (10) and clamp (11).
Install fuel tube (12) in elbow (1) and
adapter (6). Secure with two sleeves (13)
and nuts (14).
Install fuel tube (12) on three weldnuts
(15). Secure with three screws (16) and
clamps (17).
Install fuel hose (18) in elbow (1). Secure
with sleeve (19) and nut (20).
14-28
