REPLACE POWER CONTROL ENCLOSURE POWER SUPPLIES (M1068 ONLY)

TM-9-2350-261-34 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
485

TM 9-2350-261-34 REPLACE POWER CONTROL ENCLOSURE POWER SUPPLIES (M1068 ONLY) DESRIPTION This task covers: Remove (page 21.1-39). Clean, Inspect, and Repair (see Chapter 2). Install (page 21.1-40). INITIAL SETUP Tools: Personnel Required: General Mechanic’s Tool Box Power-Generation Equipment Repairer 52D10 (Item 35, App B) Helper (H) Materials/Parts: Lockwasher (4) Lockwasher (8) Lockwasher (12) Locknut (16) Strap References See your -10 See your -20 Equipment Conditions: Power control enclosure assembly removed see your -20) REMOVE 1. Remove 12 screws (1), lockwashers (2), and cover (3) from enclosure (4). Discard lockwashers. 2. Remove four screws (5) and lockwashers (6) connecting power supply (7) to bracket (8). Discard lockwashers. 3. Remove four screws (5) and lockwashers (6) connecting power supply (9) to bracket (8). Discard lockwashers. GO TO NEXT PAGE Change 4 21.1-39

Privacy Statement
Press Release
Contact