56.
57.
58.
59.
Thread personnel heater wiring harness (1)
60.
through transverse beam from driver’s
compartment into personnel compartment.
61.
Connect wiring harness (1) to personnel
heater (2).
Connect circuit 400 lead (3) of rear main
62.
wiring harness (4) to control box lead (5).
Connect circuit 402 lead (6) to fuel pump
63.
lead (7) and to connector (8) of heater wir-
ing harness (1).
Secure circuit 402 lead (6) to cradle (9) with
cradle clip (10).
Secure circuit 402 lead (6) to four
weldnuts (11) with four clamps (12), screws
(13), and one strap (14).
Remove screw ( 15) securing clamp (16), and
dome light lead (17) from weldnut (18).
Secure heater wiring harness (1), ground
lead (19), clamp (16), and domelight
lead (17) to weldnut (18) with screw (15)
and two washers (20).
11-24
TM 9-2350-261-34
