TM 9-2350-261-34
FOLLOW-THROUGH STEPS
1.
2.
3.
4.
5.
6.
Fill fuel compartment (M106A2 and
M125A2) (see your -10).
Open fuel shutoff cock (see your -10) and
check for leaks.
Connect battery ground lead (see your –20).
Start personnel heater (see your -10) and
check personnel heater installations for
proper operation and leaks.
Turn personnel heater OFF (see your –10).
Install fuze rack (M106A2) (see your -20).
7.
8.
9.
10.
11.
12.
Install fire extinguisher (M106A2 and
M125A2) (see your –20).
Install front horizontal ammunition racks
and supports (M106A2 and M125A2)
(see your -20).
Install floor plates (see your -20).
Install power plant rear access panel
(see your -20).
Raise and lock ramp (see your -10).
Stop engine (see your -10).
END OF TASK
Change 2
11-25 (11-26 blank)
