N O T EDo steps 26 thru 32 on M106A2, M1064,and M125A2 only.26.Remove three screws (1), washers (2), andsix clamps (3) from three weldnuts (4).Retain three screws and washers; discardsix clamps.27.Remove two screws (5), washers (6), andguard (7) from hull crossmember.28.Secure heater fuel hose (8) and heater fueltube (9) to nipple body (10) with twosleeves (11) and nuts (12).29.Secure heater fuel tube (9) and heater fuelhose (13) to elbow (14) with twosleeves (15) and nuts (16).30.Install tee (17) and cap (18) on fuelpump (19).31.Secure heater fuel hose (13) to elbow (17)with sleeve (20) and nut (21).TM 9-2350-261-3432.Secure heater fuel hose (8), heater fueltube (9), and engine fuel hoses to threeweldnuts (4) with three new clamps (22),screws (1), and washers (2).N O T EDo steps 32.1 thru 32.3 on M1064 only.32.1 Remove two screws (5), washers (6), andguard (7) from hull crossmember.32.2 Install tee (17) and cap (18) on fuelpump (19).32.3 Secure heater fuel hose (13) to tee (17)with sleeve (20) and nut (21).33.Secure guard (7) to hull crossmember withtwo screws (5) and washers (6).Change 211-19
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business