TM 9-2350-261-34
FOLLOW-THROUGH STEPS
5.
1.
2.
3.
4.
Fill fuel compartment (see your –10).
6.
Open fuel shutoff cock and check for leaks
(see your –10).
7.
Connect battery negative lead (see your –20). 8.
Start personnel heater, and check personnel
9.
heater installation for proper operation and
leaks (see your –10).
Turn personnel heater OFF (see your –10).
Install power plant rear access panel
(see your -20).
Install rear floor plate (see your –20).
Raise and lock ramp (see your –10).
Stop engine (see your –10).
END OF TASK
11-14
