TM 9-2350-261-34
W A R N I N G
D ry
cleaning
solvent
P - D - 6 8 0 is
toxic
and
flammable. Wear protective
goggles and gloves; use only
in
well-ventilated area;
avoid contact with skin,
eyes, and clothes, and do not breathe
vapors. Keep away from heat or flame.
Never smoke when using slovent; the
flash point for type I dry cleaning solvent
is 100°F (38°C) and for type II is 138°F
(50°C). Failure to do so may result in
injury or death to personnel.
20. Clean external pipe threads of fittings with
dry cleaning solvent.
21. Apply a light coat of sealing compound to
clean external pipe threads of fittings.
N O T E
Do steps 22 thru 25 on M106A2 and
M125A2 only
22.
23.
Remove plug (1) from elbow (2). Discard
plug.
Install shutoff cock (3) on elbow (2).
24.
25.
Install adapter (4) on shutoff cock (3).
Install personnel heater fuel hose (5) on
adapter body (4).
N O T E
Do steps 25.1 thru 25.5 on M1064 only.
25.1 Close heater fuel shutoff valve (6).
25.2 Remove plug (7) from shutoff valve (6).
Discard plug.
25.3 Install adapter (8) on shutoff valve (6).
25.4 Install ebow (9)
25.5 Install personnel
elbow (9).
on adapter (8).
heater fuel hose (10) on
11-18
Change 2
