9.10.11.12.13.14.Secure plenum (1) to personnel heater (2)with four lockwashers (3) and screws (4).Secure two saddles (5) to two brackets (6)with four screws (7), three washers (8),ground strap (9), and four nuts (10).Install two clamps (11) on two saddles (5).Position clamp (12) on heater intakepipe (13) and clamp (14) on heater exhaustpipe (15).Install elbow (16) on heater intake pipe (13)and intake elbow (17).Position heater (2) and shield (18) on twomounts (5), and secure with twoclamps (11).15.16.17.18.19.TM 9-2350-261-34 Secure ground strap (9) to heater (2) withtwo lockwashers (19) and existingscrew (20).Tighten clamp (14) onpipe (15) and exhaustTighten clamp (12) onpipe (13).Secure fuel pump (21)with four lockwashersscrews (24).heater exhaustpipe in earner.heater intaketo hull bracket(23) and two(22)Secure pump lead (25) to hull bracket (22)with two lockwashers (26), screws (27), andnuts (28).GO TO NEXT PAGE11-17
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business