TM 9-2350-261-34
66. Remove two screws (1) and control box (2)
69. Secure control box (2) to control box case (3)
from control box case (3).
with two screws (1).
67. Remove two screws, nuts, and washers
70. Clean small area on hull support next to
supplied with control box case (3). Discard
control box (2) and apply warning decal
screws, nuts, and washers.
(see your 20).
68. Secure control box case (3) to two
weldnuts (4) with two lockwashers (5) and
screws (6).
11-12