TM 9-2350-261-20-2
R E P A I R T R A N S M I S S I O N R A N G E S E L E C T O R
DESCRIPTION
This task covers:
Remove (page 23-50).
Clean, Inspect, and Repair (page 23-51).
Install (page 23-52).
INITIAL SETUP
Tools:
Equipment Conditions:
General Mechanics Tool Kit (Item 30, App D)
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Materials/Parts:
Ramp lowered (see your -10)
Cotter pin (4)
Trim vane lowered and power plant front
Lockwasher (2)
access door open (see your -10)
Spring pin (2)
Driver’s power plant access panel removed
(page 24-25)
Personnel Required:
Range selector removed from earner
Unit Mechanic
(page 23-48)
References:
See your –10
DISASSEMBLE
1.
2.
3.
Remove two
housing (3).
Remove two
washers (6),
screws (1) and cover (2) from
screws (4), washers (5), lock-
nuts (7), and neutral start
switch (8) from housing (3). Discard lock-
washers.
Remove cotter pin (9), pin (10), control lever
assembly (11), and spring (12) from shaft
(13). Discard cotter pin.
4. Remove spring pin (14) that secures
cam (15) to shaft (13). Discard spring pin.
5. Remove cam (15) and shaft
housing (3).
(13) from
23-50
