TM 9-2350-261-20-2
R E P L A C E A U X I L I A R Y T A N K A N D P A R TS
DESCRIPTION
This task covers:
Remove (page 8-28).
Install (page 8-29).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Socket Wrench Set (Item 89, App D)
Torque Wrench (Item 95, App D)
Materials/Parts:
Sealing compound (Item 46, App C)
Sealing compound (Item 48, App C)
Filler neck gasket
Lockwasher (4)
Personnel Required:
Unit Mechanic
References:
see your -10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Power plant grill raised (page 5-2)
REMOVE
1.
2.
3.
Loosen three clamps (1),
hoses (2) from auxiliary
Remove adapter (4) and
auxiliary tank (3).
Remove four screws (6),
Disconnect
tank (3).
two elbows
4.
three
5.
(5) from
6.
washers (7), and
auxiliary tank (3) from power plant grill.
Remove two hooks (8) and chain (9) from
bracket (10) and filler cap (11).
Remove filler cap (11) from filler neck (12).
Remove four screws (13), flat washers (14),
lockwashers (15),
bracket (10), and
tank (3). Discard
filler neck (12),
gasket (16) from auxiliary
gasket and lockwashers.
8-28
