TM 9-2350-261-20-2
R E P A I R R A D I A T O R A C C E S S D O O R S E A L S A N D F A S T E N E RS
DESCRIPTION
This task covers:
Remove (page 8-25).
Repair (page 8-26),
Install (page 8-26).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Rivet tool (Item 59, App D)
Materials/Parts:
Dry cleaning solvent (Item 13, App C)
Sealing compound (Item 52. App C)
Rivet (4)
Seal
Personnel Required:
Unit Mechanic
References:
see your -10
Equipment Conditions
Engine stopped/shutdown (see your -10)
Driver’s power plant access panel removed
(page 24-25)
REMOVE
1.
2.
3.
Loosen two thumbscrews (1) and clamps (2).
Remove radiator access panel (3) from power
plant compartment bulkhead.
Release two fasteners (4) securing radiator
access door (5) to radiator opening, and open
door.
Remove four rivets (6) and two fasteners (4)
from radiator access door (5). Discard rivets.
W A R N I NG
Dry cleaning solvent P-D
680 is toxic and flammable.
Always use in an open area
with good air flow, away
from - sparks,
h e a t , or
flames. Wear goggles and
gloves. Do not breathe vapors. Avoid con-
tact with skin, eyes, and clothes. If you
get dizzy while using solvent, breathe
fresh air and get medical help. If solvent
gets on hands, wash them. If solvent gets
in eyes, flush eyes with fresh water and
get medical help immediately. Keep fire
extinguisher nearby.
GO TO NEXT PAGE
8-25
