TM 9-2350-261-20-2
R E P L A C E R A D I A T O R A N D P A R TS
DESCRIPTION
This task covers:
Remove (page 8-20). Install (page 8-21).
Tools:
General Mechanics Tool Kit (Item 30, App D)
Endless Sling (Item 64, App D)
Socket Wrench Set (Item 89, App D)
Torque Wrench (Item 95, App D)
Materials/Parts
Sealing compound (Item 46, App C)
Sealing compound (Item 52, App C)
Gasket (2)
Key washer (4)
Mount (4)
Seal (4)
Personnel Required:
Unit Mechanic
Personnel Required (cont):
Helper (H)
References:
See your -10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Driver’s power plant access panel removed
(page 24-25)
Power plant rear upper access panel removed
(page 24-27 or 24-29)
Power plant grill raised (page 5-2)
Balance hose removed (page 8-24)
REMOVE
1.
W A R N I NG
Radiator is heavy and can
cause
back
injury
if
handled improperly. Be
sure to use a hoist and
helper to remove radiator.
Attach sling to lifting device of at least
150 lb (68 kg) capacity to radiator. Remove
10 nuts (1), 20 washers (2), and 10 screws
(3) that secure radiator supports (4) to power
plant grill (5). Lift radiator supports and
radiator (6) from power plant grill. Lower
radiator to a work table or flat wooden plate
and detach lifting device. Have helper assist.
8-20
INITIAL SETUP
