TM 9-2350-261-20-2
2. Remove two end seals (1) from power plant
7. Remove four screws (14), washers (15),
grill (2). Discard seals.
radiator supports (16), and mounts (17) from
radiator (5). Discard mounts.
3. Remove two side seals (3) from power plant
grill (2). Discard seals.
INSTALL
4.
5.
6.
Remove balance
radiator (5).
hose adapter (4) from
Remove two screws (6), key washers (7),
radiator outlet elbow (8), and gasket (9) from
radiator (5). Discard gasket and washers.
Remove two screws (10), key washers (11),
radiator inlet elbow (12), and gasket (13)
from radiator (5). Discard gasket and
washers.
C A U T I O N
If installing a new radiator,
shipping plugs are removed.
8. Lubricate four new mounts (17)
Install mounts on two radiator supports (16).
make sure
with water.
9. Install two radiator supports (16) on radiator
(5). Secure with four screws (14) and
washers (15). Tighten screws to 360-420
in-lb (41-48 N•m) torque. Use torque wrench
and socket wrench set.
GO TO NEXT PAGE
8-21
