TM 9-2350-261-20-2
A D J U S T B R A K E L O C K I N G P A WL
I N I T I A L S E T U P
Tools:
General Mechanics Tool Kit (Item 30, App D)
Drill Set (Item 24, App D)
Materials/Parts:
Cotter pin (2)
Self-locking nut (2)
spring pin (4)
Personnel Required:
Unit Mechanic
References:
See your -lo
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Trim vane lowered and power plant front
access door open (see your -10)
Driver’s seat removed (page 25-127)
Remove air cleaner housing and element
(page 7-7)
A D J U S T
4.
1.
2.
3.
Unlock both steering levers (1).
Disconnect two return springs (2) from
5.
bracket (3).
Remove two cotter pins (4) and two clevis
pins (5) from two clevises (6) and differential
brake levers (7). Discard cotter pins.
Remove two screws (8), locknuts (9), two
quadrants (10), and stops (11) from
bracket (12). Discard locknuts.
Place quadrants (10) and stops {11) on
bracket (12). Install screws (8) and new
locknuts (9), push down on quadrants while
screws and locknuts are tightened.
23-4
