T M
8.
9.
10.
9-2350-261-20-2
Loosen two clamps (1). Slide hose (2) off the
housing (3).
Remove two screws (4), lockwashers (5), and
washers (6) securing housing (3) to the
engine. Remove housing (3) and gasket (7).
Discard lockwashers and gasket.
If hose (2) is damaged, slide off tube (8).
Discard hose.
INSTALL
11.
12.
13.
If hose (2) was discarded, slide new hose on
tube (8). Slide two clamps (1) on hose. Do
not tighten.
Apply sealing compound (Item 48) to both
sides of new gasket (7). Place gasket on
housing (3). Secure housing (3) on engine
with two screws (4), new lockwashers (5),
and two washers (6).
Slide hose (2) onto housing (3). Postion two
clamps (1) on each end of hose, and tighten.
8-16