TM 9-2350-261-20-2
INSTALL
7. Secure insulation (1) to cooIant tube (2) with
two clamps (3).
8. Secure bracket (4) to bulkhead with screw
(5), washer (6) and new locknut (7).
9.
10.
11.
Place clamp (8) on coolant tube (2). Secure
clamp to bracket (4) with screw (9), washer
(10) and new locknut (11).
Secure hose (12) to radiator inlet elbow (13)
and coolant tube (2) with two clamps (14).
Secure hose (15) to coolant tube (2) and
deaeration elbow (16) with two clamps (17).
FOLLOW-THROUGH STEPS
1. Fill cooling system (page 8-5).
5.
2. Start engine (see your-10). Check for leaks.
6.
3. Stop/shutdown engine (see your -10).
Install power plant rear access panel
(page 24-27 or 24-29).
Close power plant front access door and raise
trim vane (see your –10).
4. Install driver’s power plant access panel
(page 24-25).
END OF TASK
8-13
