TM 9-2350-277-20-5
REPLACE TUBE FROM RAMP CONTROL VALVE TO BULKHEAD — Continued
0664 00
FOLLOW-THROUGH STEPS
1.
Check fluid level in hydraulic tank (WP 0155 00).
WARNING
Wearing loose clothing around moving parts can allow personnel to get caught and result in
injury or death. Tuck in loose clothing.
WARNING
Unlocked ramp can fall open suddenly. Personnel can be killed or injured. Do not stand behind
ramp. Keep away from ramp during testing and bleeding of hydraulic lines.
2.
Start engine (see your -10).
3.
Check for hydraulic leaks.
4.
Raise and lower ramp several times to bleed air from system.
5.
Install driver’s power plant access panel (see your -10).
6.
Raise and lock ramp (see your -10).
7.
Stop engine (see your -10).
8.
Install left front floor plate (WP 0453 00).
END OF TASK
0664 00-4
