FOLLOW-THROUGH STEPS - TM-9-2350-277-20-5

INSTALLATION-cont. - TM-9-2350-277-20-5_167

REPLACE RAMP CYLINDER BREATHER HOSE (ALL EXCEPT M1064A3)

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
119

TM 9-2350-277-20-5 REPLACE HOSE FROM BULKHEAD CONNECTION TO RAMP CYLINDER — Continued 0665 00 FOLLOW-THROUGH STEPS 1. Check fluid level in tank. Add fluid as needed (see your 10). WARNING Wearing loose clothing around moving parts can allow personnel to get caught and could result in injury or death. Tuck in loose clothing. WARNING Unlocked ramp can fall open suddenly. Personnel can be killed or injured. Do not stand behind ramp. Keep away from ramp during testing and bleeding of hydraulic lines. 2. Start engine (see your -10). Check for hydraulic leaks. 3. Raise and lower ramp several times to bleed air from system (see your -10). 4. Install power plant rear access panel (WP 0439 00). 5. Install floor plates (WP 0539 00). 6. Lower tread plate on mortar base plate. 7. Raise and lock ramp (see your -10). 8. Stop engine (see your -10). END OF TASK 0665 00-4

Privacy Statement
Press Release
Contact