INSTALLATION - TM-9-2350-277-20-5

REPLACE TUBE FROM RAMP CONTROL VALVE TO BULKHEAD

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
111

TM 9-2350-277-20-5 REPLACE RAMP CONTROL VALVE HOSE AND ELBOW — Continued 0663 00 INSTALLATION 1. Install adapter (1) and quick disconnect (2) on hose (3). Apply sealing compound to male threads of adapter (1). 2. Install elbow (4) on elbow (5) on top of ramp control valve (6). 3. Connect hose (3) to elbow (4). 4. Install clamp (7) on hose (3), and secure with washer (8) and screw (9). 5. Connect quick disconnect (2) at bottom of hose (3) to engine hose quick disconnect. FOLLOW-THROUGH STEPS 1. Fill hydraulic reservoir (WP 0155 00). 2. Install driver’s power plant access panel (see your -10). END OF TASK 0663 00-3/4 blank

Privacy Statement
Press Release
Contact