TM 9-2350-277-20-4
REPLACE FLOOR PLATES (M981A3 ONLY) Continued
0541 00
4.
Position floor plate (10) on vehicle structural supports (3) and secure in place with six washers (11), washers (12), and
screws (13).
5.
Install cable protector (14) and secure with four washers (15), new lockwashers (16), and bolts (17).
NOTE
Position the targeting station at 180
azimuth. Two of the screws (5) securing the two debris
guards (1) are accessed through the holes in platform assembly (9) where the access covers (6)
were removed.
6.
Install two debris guards (1) on floor assemblies (2) and (3) using six washers (4) and screws (5).
7.
Install two access covers (6), six washers (7), and bolts (8) to platform assembly (9).
8.
Install access cover (10), two washers (11), and screws (12) to platform assembly (9).
0541 00-6