TM 9-2350-277-20-4
REPLACE FLOOR PLATES (M981A3 ONLY) — Continued
0541 00
NOTE
Position the targeting station at 180
azimuth. One of the 13 screws (1) securing floor assemblies
(4) and (5) is accessed through the hole in platform assembly (12).
6.
Remove 13 screws (1), washers (2), and washers (3) from floor assemblies (4) and (5) and floor plate (6).
7.
Remove four bolts (7) lockwashers (8), washers (9), and cable protector (10). Discard lockwashers.
8.
Remove floor assemblies (4) and (5) and floor plate (6) from structural support (11) of vehicle.
0541 00-3
