ASSEMBLY - TM-9-2350-267-34

IDLER ARM ASSEMBLY REPAIR (CONTINUED) - TM-9-2350-267-34_189

TORSION BAR ANCHORS FOR ROADWHEEL 3: REMOVAL, CLEANING AND INSTALLATION

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
162

7-28 Change 4 TM 9-2350-267-34 IDLER ARM ASSEMBLY REPAIR (CONTINUED). ASSEMBLY A B C D Pack idler arm (19) with grease (item 26, Appx B). Install plug (18), new seal (17), spindle (16), retainer (15), ring (14), preformed packing (13), outer sleeve bearing (12), and inner sleeve bearing (11) on idler arm (19) and secure with eight screws (10). Torque screws to 351 lb-fit. Install preformed paeking (9), idler arm retainer (8), outer sleeve bearing (7), bearing spacer (6), and inner sleeve bearing (5). Install spring pin (4) and idler arm cap (3) using flat washer (2) and screw (1).

Privacy Statement
Press Release
Contact