ROD ASSEMBLIES: ASSEMBLY
A
B
C
NOTE
Assemble rod so that center-to-center distance between
rod ends is 16-3/4 in.
Slide boot (62.1) and Chip (62.2) onto rod (62.5).
Slide quick-release pin (62.4) and chain onto rod (62.5).
Install two nuts (62) and two rod ends (63) onto end of rod (62.5). Do not
tighten clamp or nuts at this time. They will be tightened during adjustment.
7-14.1
Change 4
ASSEMBLY
NOTE
Assemble rod so that center-to-center distance between
rod ends is 8-11/16 in.
A Install two nuts (62), one at each end of rod (62.3).
B
Install two rod ends (63) on rod (62.3). Do not tighten nuts at this time. They
will be tightened during adjustment.
TM 9-2350-267-20
