7-16
Change 1
TM 9-2350-267-20
BRAKE ASSEMBLY IN DRIVER’S COMPARTMENT: REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION AND ADJUSTMENT
(CONTINUED)
NOTE
Pin must be driven out from top.
A Remove two cotter pins (20) and pin (21) at brake pedal (22).
Discard cotter pins.
B
Remove screw (23), locknut (24) and two flat washers (25) at
brake pedal (22). Discard locknut.
C Loosen two setscrews (26) at actuator (27).
D Remove two screws (28), two lockwashers (29), mounting
bracket (30), lockring (31) and boot (32) at parking brake latch
assembly (33). Discard lockwashers, lockring and boot.
TA312835
