7-12
Change 4
TM 9-2350-267-20
STEERING CONTROL LINKAGE: REMOVAL, DISASSEMBLY, ASSEMBLY AND INSTALLATION (CONTINUED)
G
H
I
J
K
L
Remove pin (24) with chain (29) from lever (28). Separate rod (30) from
lever (28).
Remove snap ring (27) from lever (2$).
Remove pin (15) with chain (14) from rod (30) and lever (17). Separate rod
(30) from lever (17).
Remove three screws (18) and lockwashers (19) and housing assembly at
bulkhead. Discard lockwashers.
Remove two screws (21) and two lockwashers (22) from cover (23). Remove
cover (23) from bulkhead. Discard lockwashers.
Remove rod (30) and lever assembly (23).
*
STEERING SHAFT ASSEMBLY: DISASSEMBLY
DISASSEMBLY
A
B
C
D
Remove cotter pin (32), flat washers (33), pin (34) and steering wheel (35)
horn shaft (36). Discard cotter pin.
Remove sleeve (37), spring (38) and washer (39) from shaft (36).
Remove three screws (40), three lockwashers (41) and master warning light
bracket (42) from bracket (11). Discard lockwashers.
Remove two retaining rings (43), bearing (44) and bracket (11) from shaft
(36). Discard retaining rings.
