TM 9-2350-261-34
REPLACE CABLE ASSEMBLIES W117 AND W118 (M1068 ONLY)
DESCRIPTION
This task covers:
Remove (page 21.1-62).
Install (page 21.1-63).
INITIAL SETUP
Tools:
Personnel Required (cont):
Electronic Equipment Tool Kit
(Item 94.1, App B)
Material/Parts:
Lockwasher (12)
Helper (H)
References:
See your -20
Strap
Equipment Conditions:
External commmunication box removed
(see your -20)
Personnel Required
Radio Repairer 29E10
REMOVE
NOTE
Tag all cables before disconnecting them.
1. Remove 12 screws (1), lockwashers (2), and
connectors J101 (3) and J102 (4) from the
external communication box (5). Discard
lockwashers.
2. Remove cable assemblies W117 (6) from
connector J101 (3).
3. Remove cable W117 (6) and W118 (7) from
connector J102 (4) of external communication
box (5).
4. Remove screws (8) and clamps (9) from
weldnuts (10), as required.
5. Remove and discard straps (11), as required.
6. Disconnect cable assembly W118, plug
P105 (12) from jack J135 (13) on signal
patch panel box (14).
7. Pull cable assembly W118 down through
base (15) out of external communications
box (5). Remove cable assembly W118 from
vehicle. Have helper assist.
21.1-62
Change 4