REPLACE RF 1,2,3,4 CABLE ASSEMBLIES W111, W112, W113, AND W114 (M1068 ONLY)

TM-9-2350-261-34 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
504

TM 9-2350-261-34 REPLACE RF 1,2,3,4 CABLE ASSEMBLIES W111, W112, W113, AND W114 (M1068 ONLY) DESCRIPTION This task covers: Remove (page 21.1-58). Install (page 21.1-59). INITIAL SETUP Tools Personnel Required (cont): Electronic Equipment Tool Bit (Item 94.1, App B) Material/Parts: Lockwasher (14) Straps Personnel Required Radio Repairer 29E10 Helper (H) References: See your -20 Equipment Conditions: External communication box removed (see your -20) REMOVE 1. Lift and secure cover (1) of external communications box (2). 2. Remove 14 screws (3), lockwashers (4), and faceplate (6) from external communications box (2). Discard lockwashers. NOTE Tag all cables before disconnecting them. 3. Disconnect W111, plug P2 J115 (7) on faceplate (5). (6) from jack 4. Disconnect W112, plug P2 J116 (9) on faceplate (5). (8) from jack 5. Disconnect W113, plug J117 (11) on faceplate P2 (5). (10) from jack 6. Disconnect W114, plug P2 (12) from jack J118 (13) on faceplate (5). 7. Remove and discard straps (14) as required. 8. Remove five clamps (15) and screws (16). 9. Remove clamp (17) and screw (18). 10. Pull harness through base (19) of communications box (2). Have helper assist. 21.1-58 Change 4

Privacy Statement
Press Release
Contact