TM 9-2350-261-34
REPLACE LAN A CABLE W101 AND/OR LAN B CABLE W102
(M1068 ONLY)
DESCRIPTION
This task covers:
Remove (page 21.1-56).
Install (page 21.1-57).
INITIAL SETUP
Tools:
Electronic Equipment Tool Kit
(Item 94.1, App B)
Materials/Parts:
Locknut (2)
Lockwasher (14)
Strap
Personnel Required:
Radio Repairer 29E10
Helper (H)
References:
See your -10
See your -20
TM 11-7010-256-12&P
Equipment Conditions:
Engine stopped (see your -10)
Carrier blocked (see your -10)
All external power disconnected
(see TM 11-7010-266-12&P)
Battery ground strap disconnected
see your -20)
REMOVE
1. Lift and secure cover (1) of external
commnunications box All (2).
4. Disconnect cable W102, jack J104 (11)
jamnut (7), inside bushing (8) and outside
bushing (9) from faceplate LAN B (12) on
external communications box All (2).
2. Remove fourteen screws (3), lockwashers (4),
and faceplate (5) from external
communications box A11 (2). Discard
lockwashers.
NOTE
5. Remove and push cable(s) W101 and/or
W102 (6 and/or 11) down into hull, pull
through opening in bottom (13) of external
communications box All (2). Have helper
assist.
Tag cables before disconnecting them.
3. Disconnect cable W101, jack J103 (6), jamnut
(7), inside bushing (8) and outside bushing
(9) from faceplate LAN A (10) on external
communications box A11 (2).
21.1-56
Change 4
