TM 9-2350-261-34
28. Install four leads (1) on four binding
posts (2).
29. Install connector J137 (3), gasket (4), dust
cap (5), four screws (6), and new
locknuts (7) on faceplate (8).
30. Install connector J8 (9), gasket (10), four
screws (11), and new locknuts (12) on
box (13).
31. Install new gaskets (14) by applying a thin
coat of adhesive to box surface and to
gasket surface. Allow 10 to 20 minutes to
dry (tacky to the touch). Position gasket on
box (13) and press firmly into place.
32. Install faceplate (8), 14 new
lockwashers, (15) and screws (16) on
box (13).
FOLLOW-THROUGH STEPS
1. Install Tent interface panel box assembly
bee your -20).
END OF TASK
Change 4
21.1-51
