TM 9-2350-261-34
R E P A I R A C P O W E R E X T E N S I O N B O X E S A 6 A N D A 7
( M 1 0 6 8 O N L Y )
D E S C R I P T I ON
This task covers: Disassemble (page 21.1-15). Clean, Inspect, and Repair see Chapter 2).
Assemble (page 21.1-W.
INITIAL SETUP
T o o l s :
References:
Automotive Fuel and Electrical System Repair
see your -10
Tool Kit (Item 7, App B)
see your -20
Matexials/Parts:
Equipment Conditions:
Self-locking nut (40)
AC power extension box A6 removed
(see your -20)
Personnel Required:
AC power extension box A7 removed
Fuel and Elec Sys Rep 63G10
bee your -20)
D I S A S S E M B L E
NOTE
Mechanical Disasembly/Assembly are the
same for A6 and A7. Electrical reference
designators are different. Use Wiring Dia-
gram for reassembly.
3. Disconnect leads from connectors if necessary.
4. Remove sixteen screws (8), locknuts (9), four
dust caps (10), and connectors (11) from
cover (2). Discard locknuts.
1. Remove four screws (1), cover (2), and
gasket (3), from extension box (4).
N O TE
Tag all leads before disconnecting for
proper assembly later.
2. Remove four screws (5), locknuts (6), and
connectors J1 (7) from extension box (4).
Discard locknuts.
GO TO NEXT PAGE
Change 4
21.1-15
