TM 9-2350-261-34
INSTALL
NOTE
Both inverters are installed the same way.
17.
18.
19.
20.
Install retaining strip (1), inverter hous-
ing (2), mounting strip (3), on sponson and
secure with three screws (4).
Install four resilient mounts (5) on inverter
housing (2) and secure with eight
screws (6), washers (7), and new
locknuts (8).
Install four straps (9) on tray (10), secure
with sixteen screws (11), thirty-two
washers (12), and new locknuts (13).
Install tray (10) on four resilient mounts (5)
and secure with four screws (14) and new
lockwashers (15).
21.
22.
Install mount (16) on inverter (17) and se-
cure with four screws (18), washers (19),
and new locknuts (20).
Install mount (16) and inverter (17) in
housing (2), secure on tray (10) with three
screws (21) and new lockwashers (22). Have
Helper assist.
21.1-12
Change 4