TM 9-2350-261-34
47.
48.
49.
50.
Disconnect circuit 514 and 515 leads (1)
from right infrared headlight (2). Disconnect
circuit 25 lead (3) from horn (4). Tag each
lead for later identification.
Unscrew nut (5) from stuffing tube (6).
Slide gasket (7) down on leads. Use a sharp
knife to slip gasket at three holes. Pull
leads free of gasket. Discard gasket.
Use a sharp knife to slit new gasket (7) at
four holes. Insert circuit 514 and 515
leads (1) for infrared headlight. Insert
circuit 25 lead (3) for horn.
51.
52.
53.
54.
Thread circuit 460 lead of harness (8)
through stuffing tube (6) and remaining hole
in new gasket (7).
Install new shell (8), new sleeve (9), and
new terminal (10 ) on circuit 460 lead (11).
Crimp terminal (10) on lead. Slide sleeve (9)
and shell (8) over terminal (10).
Insert new gasket (7) into stuffing tube (6).
Install nut (5).
Connect circuit 514 and 515 leads (1) to
infrared headlight (2). Connect circuit 25
lead (3) to horn (4).
21-8
