TM 9-2350-261-34
76.
77.
Install new wiring harness (1) in rear of
earner. Route harness (1) from center rear
along carrier main wiring harness (2) to
upper right rear of earner.
Secure harness (1) to earner main
harness (2) with one new strap (3) next to
each existing harness clamp.
Connect circuit 21 leads of harness (1),
trailer light harness (4), and carrier main
harness (2).
78.
79.
80.
81.
82.
Route new wiring harness (5) from center
rear of carrier along main harness (2) to the
upper right rear of carrier.
Secure harness (5) to earner main
harness (2) with one new strap (3) next to
each existing clamp.
Route new wiring harness (6) from center
rear of carrier along main wiring
harness (2) to the upper left rear of carrier.
Secure harness (6) to carrier main
harness (2) with one new
each existing clamp.
Connect circuit 23 lead on
trailer wiring harness (4),
lead of harness (5).
strap (3) next to
harness (6), new
and circuit 23
83.
84.
85.
86.
87.
88.
Connect remaining leads of trailer
harness (4) to leads on carrier main
harness (2) that include circuit 22-460 lead.
Unscrew nut (7) from stuffing tube (8).
Slide gasket (9) down on leads.
Use a sharp knife to slit gasket at three
holes. Pull leads free of gasket (9). Discard
gasket.
Use a sharp knife to slit new gasket (9) at
four holes. Insert leads of carrier main
harness (2) in gasket.
Thread circuit 23 lead of harness (5)
through stuffing tube (8) and remaining hole
in gasket (9).
Insert new gasket (9) into stuffing tube (8).
Install nut (7).
GO TO NEXT PAGE
21-11
75.
