TM 9-2350-261-34 90. Remove plug (1) from oil cooler elbow (2).Discard plug.W A R N I NGDrycleaningsolventh e a t o rflames.WearP - D - 6 8 0 i stoxicandflammable. Always use inan open area with good airflow, away from sparks.goggles and gloves. Do not breathevapors. Avoid contact with skin, eyes, andclothes. If you get dizzy while usingsolvent, breathe fresh air and get medicalhelp. If solvent gets on hands, wash them.If solvent gets in eyes, flush eyes withfresh watera n d g etmedical helpimmediately.Keep fireextinguishernearby.91.92.93.94.95.96.Clean external pipe threads of elbow (3) andadapter (4) with dry cleaning solvent.Apply a thin, even coat of primer and thensealing compound (Item 70) to cleaned exter-nal pipe threads of elbow (3) and adapter(4). Do not apply primer or sealingcompound beyond small end of threads.Install elbow (3) in elbow (2).Install adapter (4) in elbow (3).Install insulation tube (5) on hose (6) andsecure with tape.Install hose (6) on adapter (4). Secure withclamp (7).97.98.99.Secure ground lead (8) to coolant pumpterminal (9) with nut (10).Secure circuit 402B lead (11) to coolantpump terminal (12) with nut (13).Secure circuit 402B lead (11) tono. 4 (14) of terminal strip (15)screw (16).terminalwith14-12
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business