TM 9-2350-261-34
104. Install wiring harness plate (1) to drivers
compartment bulkhead. Secure with four
screws (2) and washers (3).
110. Connect control box connector (11) of wiring
harness (12) to control box receptacle (13).
111. Connect main wiring harness 402A lead
(14) to coolant heater wiring harness lead
105.
106.
107.
108.
109.
Remove two screws (4) and control panel
(5) from control box case (6).
Remove and discard two screws, nuts, and
washers supplied with control box case (6).
Install control box case (6) on hull bracket
(7). Secure with two screws (8).
Install control panel (5) to control box case
(6). Secure with two screws (4).
Connect circuit 400A lead (9) to control box
lead (10).
14-14
(15). Secure wiring harness (12) to front
main wiring harness (16) with eight
straps (17).
112. Install wiring harness (12) on mounting
bracket. Secure with screw (18) and
clamp (19) .