TM 9-2350-261-34
28. Install insulation
cure with tape.
tube (1) on hose (2). Se-
29. Install hose (2) on two weldnuts (3). Secure
with two screws (4) and clamps (5).
31.
32.
33.
34.
35.
36.
Install coolant heater fuel pump (7) on
bracket (8). Secure with two screws (9), four
lockwashers (10), two washers (11), and
two nuts (12).
Apply a thin, even coat of primer and then
sealing compound (Item 70) to cleaned exter-
nal tapered pipe threads of adapter (13) and
elbow (14). Do not apply primer or sealing
compound beyond small end of tapered
threads.
Install adapter (13) on coolant heater fuel
pump (7).
Install fuel hose (15)
Install elbow (14) on
pump (7).
Install fuel hose (16)
30. Make sure heater fuel valve (6) is closed.
on adapter (13).
coolant heater fuel
on elbow (14).
GO TO NEXT PAGE
14-5
