TM 9-2350-261-34
17.
18.
19.
Install hose (1)
Tighten clamp.
Install hose (4)
Tighten clamp.
Install hose (7)
and clamp
and clamp
and clamp
20.
21.
22.
(2) on elbow (3).
(5) on elbow (6).
(8) on shutoff
cock (9). Tighten clamp.
Install exhaust pipe (10) on lower tube (11).
Secure With clamp (12). Do not tighten
clamp.
Install lower tube (11) in coolant heater
(13). Secure with clamp (14). Do not tighten
clamp.
Tighten two clamps (12 and 14).
23.
24.
25.
26.
27.
Remove two screws (15), two washers (16),
plate (17), and gasket (18) from engine
right side. Discard plate and gasket.
Install elbow (19) and draincock (20) in
mount (21).
Apply a thin coat of sealing compound
(Item 71) to both sides of gasket (22) before
assembly.
Install mount (21) and gasket (22) on
engine right side opening. Secure with two
screws (15) and washers (16).
Install hose (23) on elbow (19). Secure with
clamp (24).
14-4
