T M
73.
74.
75.
76.
77.
9-2350-261-34
Install grommet (1) on circuit 400A lead (2).
Feed lead into battery box (3). Install
grommet in battery box hole.
Remove nut (4) that holds circuit 6 lead (5)
to battery positive terminal (6).
Place circuit 400A lead (2) on battery
terminal bolt (7). Secure with nut (4).
Place circuit 6 lead (5) and circuit 400A
lead (2) on two strap assemblies (8). Secure
strap assemblies.
Remove two screws (9), circuit 59 lead (10),
and two clamps (11) from hull to relocate.
78.
79.
80.
81.
82.
Install two clamps (12) on circuit 400A
lead (2).
Install two clamps (11), circuit 59 lead (10),
two clamps (12), and circuit 400A lead (2)
on two weldnuts (13). Secure with two
screws (9).
Install clamp (14) on circuit 400A lead (2).
Place circuit 59 lead clamp (15), wiring
harness ground lead (16), and circuit 400A
lead clamp (14) on weldnut (17). Secure
with three washers (18) and screws (19).
Connect circuit 402A leads (20 and 21).
13-10