N O T E
If fuel supply adapter kit is not installed,
follow steps 22 thru 36.
22.
23.
24.
25.
26.
Disconnect personnel heater-to-fuel shutoff
cock flexible hose (1) from personnel heater
fuel pump (2).
Apply a thin, even coat of primer and then
sealing compound (item 68) to external pipe
threads of nipples (3 and 4), tee (5),
plug (6), shutoff cock (7), and elbow (8). Do
not apply primer or sealing compound
beyond small end of threads.
Remove tube adapter (9) from fuel
pump (2). Install adapter on fuel tube
tee (5).
Connect flexible hose (1) to adapter (9).
Install plug (6) and nipple (3) in tee (5).
27.
28.
29.
30.
31.
32.
33.
Install
Install
Install
Install
Install
TM 9-2350-261-34
nipple (4) in tee (10) and cock (7).
tee (10) on nipple (3).
adapter (11) on cock (7).
coupler (12) in fuel pump (2).
elbow (8) in coupler (12).
Connect hose (13) between elbow (8) and
adapter (11).
Install
Secure
bracket (14) on hull bracket (15).
with two screws (16) and nuts (17).
GO TO NEXT PAGE
13-5
