TM 9-2350-261-34
I N S T A LL
14. Install anchor (1) with three washers (2)
and screws (3).
15. Tighten screws to 54-59 lb-ft (73-80 N•m)
torque. Use torque wrench. Use primer paint
as lubricant on threads and under screw
heads.
16. Install cylinder (4) on anchor (1) with
headed pin (5). Secure with new cotter
pin (6).
FOLLOW-THROUGH STEPS
1. Install mortar turntable and ring gear
(see TM 9-1015-232-35).
2. Install mortar in carrier (see your -10).
3. Raise and lock ramp (see your -10).
4. Stop engine (see your -10).
END OF TASK
10-8
