WARNING
Fire resistant hydratic
(F’RH) fluid may contain
Trictesyl Phosphate which,
if taken internally, can pro-
duce
paralysis.
Hydraulic
f l u i d may b e absorkd
through the skin- Wear long sleeves,
gloves, goggles, and face shield. If FISH
get3 in eyes, wash them immediately md
get medical aid immediately. If FRH gets
on your skin, thoroughly wash with soap
and water. Wash bar& thoroughly prh
to eating or smoking,
I N S T A L L
NOTE
Soak new gasket and packing retainem in
hydraulic
fluid IO
minutes minimum,
then coat gasket and packing retainem
with grease.
11. Install new prefbrrned packing (1) on
cylinder head (2).
12. In&all new prafomred packing; (3) and new
pm-soaked and greased gasket (4) in
cylinder head (2).
NOTE
&al set consists of two rod wipera and a
backup ring.
13- Install two new rod wipers (5), new backup
ring (61, and new retaining ring (‘7) in -
cylinder head (2).
14, lnst,d cylinder head (2) on piston end of
d (8).
15, Install new preformed packing (9) on
rod (8).
16. Install piston (10) on rod (8). Secum with
nut (11).
17
18
. ,
.
19.
20.
Stake piston end of md (8) to rdain
nut (11).
InstaIl new pre-soaked packing Mailaera (12)
and new pr8fmed pa4Sng (13) on
piston (10).
Install piston (lo), rod (8), and cylinder
head (2) in barrel (14). Secure cylinder head
in barrel with new retaining ring (13).
Place spacer (16) on cylinder head (2).
Secure with new retaining ring (17).
FOLLOWTHROUGH S T E P S
1. Install ramp hydraulic cylinder
bee your -20).
2. Check ramp hydraulic fluid level
be your Lo).
END OF TASK
10-3
