TM 9-2350-261-20-2
R E P L A C E F A N D R I V E F I X E D I D L E R A N D P U L L E Y
DESCRIPTION
This task covers:
Remove (page 8-37).
Install (page 8-38).
INITIAL SETUP
Tools:
References:
General Mechanics Tool Kit (Item 30, App D)
see your -10
Snap ring pliers (Item 45, App D)
Torque wrench (Item 97, App D)
Equipment Conditions:
Materials/Parts:
Cotter pin (2)
Personnel Required:
Unit Mechanic
Engine stopped/shutdown (see your -10)
Ramp lowered (see your –10)
Power plant rear access panel removed
(page 24-27 or 24-29)
REMOVE
1. Remove fan drive belts (page 8-35).
2. Remove bolt (1), washer (2), nut (3) and idler
pulley (4) from idler arm (5).
3. Remove two cotter pins (6), straight pins
(7 and 8), and idler arm (5) from transfer
gearcase. Discard cotter pins.
4. Remove two retaining rings (9),
bearings (10), and spacer (11) from idler
pulley (4).
GO TO NEXT PAGE
8-37
